Seria Master HE este disponibilă între 100 și 800 kVA. UPS-ul dispune de o nouă tehnologie de conversie pe două linii, care utilizează controlul IGBT și DSP (Digital Signal Processor) pentru a oferi protecție maximă, calitate energetică și energie verde pentru orice tip de aplicație, inclusiv centre de date primare (Primary Data Center), site-uri de recuperare în caz de catastrofe, dar și aplicații de securitate.
Eficiența ridicată înseamnă o putere activă mai mare disponibilă în comparație cu UPS-ul de generație mai veche, datorită rezultatelor unitare. Puterea nominală este acordată fără o scădere indirecțială a temperaturii de funcționare.
Technical specifications of the model | MHE 100 |
Models | MHE 100 |
INPUT | |
Rated power | 100000 VA |
Voltage | 400 Vac three-phase Vac |
Voltage tolerance | + 20% – 25% |
Frequency | 50/60 Hz with autorange |
Frequency tolerance | 45/65 Hz |
Power factor | 0,99 |
Input current | 141 A |
Current distorsion | <3% |
Soft start | 0-100% in 10 |
BY PASS | |
Rated voltage | 400 Vac three-phase selectable 380 and 415 |
Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
Rated frequency | 50/60 Hz (autorange) |
Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
Rated current | 141 A |
Number phases | 3 |
Back-feed protection | Yes |
Overload capacity Inx10ms | 14 |
OUTPUT and INVERTER OUTPUT | |
Rated power | 100000 VA |
Active power | 100000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3 : 1 |
Waveform | Sinewave |
Dynamic stability | ± 5% in 5 ms |
Frequency | same as the input (autorange) |
Voltage distortion with distorcing load | <3% |
Voltage distortion with linear load | <1% |
Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
Overload | 125% 150% 200% of the rated current for 10\’ / 1\’ / 7 |
RECTIFIER OUTPUT | |
Ripple | <1% |
BATTERIES | |
Type | Maintenance-free sealed lead-acid |
Maximum recharge current | 0.2xC10 |
ENVIRONMENTAL | |
Altitude max | 1000 m |
Color | Dark grey RAL 7035 |
Remote controls | EPO and bypass |
Safety compliance | EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU |
EMC conformance | EN 62040-2 and Directive 2014/30/EU |
Protection rating | 3 |
Line-Interactive/Smart Active efficiency | up to 99,4% |
Noise | 63 dBA at 1 m |
Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
Operating temperature | 0 ÷ 40 °C |
Relative humidity | 95% no condensing |
DATA | |
Weight | 730 Kg |
Dimensions (h w d) | 1900x800x850 mm |
Download PDF